How To Flash ZTE Blade A452 Use Flash Tool

0
40

Unbrick all Xiaomi via Teamviewer.

Unlock Bootloader Xiaomi no need to wait.

Unbrick Meizu, Flash Gobal Firmware via Teamview.

Facebook Here: https://www.facebook.com/hgiyu

Gmail: ngovancanbn@gmail.com

How To Flash ZTE Blade A452 Firmware Files, This Way is Quite Quite Right To Overcome ZTE Blade A452 Bootloop, Hank, Restart, Blank, Failed Flash etc …If Your Phone Is Troubled With The Software System, Then To Fix This Is The Best Way To Reinstall Firmware Files On Your ZTE Blade A452 And For Those Who Do Not Know How To Flash / Reinstall The Firmware Please Follow Flash Tutorial Below:

ZTE Blade A452

REQUIREMENTS

Preparation for Flashing ZTE Blade A452:

  1. First Get Full Back up of your  Phone
  2. Download and install ZTE Blade A452 Driver on your pc.
  3. After that power off your  Phone and Remove the Battery (if it is Can removable).
  4. Then Download SmartPhone (SP) Flash Tool on your computer. Once downloaded, extract the SP flash Tool Zip file 
  5. Download and Extract the Stock ROM for your device according to its model number. A wrong stock ROM can damage your device. 
  6. Open Flash_tool.exe (you will find this from the extracted Sp Flash files), After that if any Warning pop-up appears on your screen click YES. 
  7. In the Download Tab, you should click on the scatter-loading button
    How To Flash ZTE Blade A452 Use Flash Tool
  8. After that Locate the scatter file (you will find the scatter file in the Stock ROM folder). now press on Download button just below the Download tab. 
    How To Flash ZTE Blade A452 Bootloop
  9. After that connect your device to your computer using a USB cable. Just press the volume buttons a couple of times so that computer detects your device.
  10. Then The flashing will begin automatically Once your device is recognized.
  11. Finally, when the process is completed a Green Ring will appear.
    How To Flash ZTE Blade A452 100% OK

The phone automatically disconnecting during flashing

  • Try changing the USB-port
  • After that run SP FLASH TOOL.
  • Make sure you have the correct drivers installed (see here)
  • Finally, try another PC and USB cable.

Thanks for reading & sharing Gudang Firmware