How To Flash Stock ROM Sony Xperia Use Flash Tool

0
21

Unbrick all Xiaomi via Teamviewer.

Unlock Bootloader Xiaomi no need to wait.

Unbrick Meizu, Flash Gobal Firmware via Teamview.

Facebook Here: https://www.facebook.com/hgiyu

Gmail: ngovancanbn@gmail.com

These are the instructions to flash Sony Xperia Stock Rom (FTF firmware) using the Xperia Flash Tool on Windows Computer.

Requirements: Your Xperia device should have at least 30-40 per cent of phone battery to perform the flashing process.

Flash Sony Xperia Stock Rom using FlashTool

  1. Download and install Sony Xperia Driver on your computer. If in case Sony Xperia driver is already installed on your computer then SKIP this step.
  2. Download and extract Sony Xperia Firmware on your computer. After extracting you will be able to see the similar file (with .ftf extension):
    Download and extract Sony Xperia Firmware
  3. Download and install Sony Xperia Flashtool on your computer (if you have already had the FlashTool, then there is no need to download it again).
    How To Flash Stock ROM Sony Xperia Use Flash Tool
  4. Once Sony Xperia Flashtool is installed, Open it from C: Drive > Flashtool.
    Sony Xperia Flashtool is installed
  5. Once Sony Xperia Flashtool is launched, you will be able to see the following screen:
    Sony Xperia Flashtool is launched
  6. Now, click on the Flash Button.
    click on the Flash Button.
  7. Now, you will be able to see the Bootmode Chooser menu. Select Flashboot option and click on OK button.
    Select Flashboot option and click on OK button.
  8. Now, load the downloaded Xperia firmware (.ftf) in the flash tool. By clicking on the Load Button.
    load the downloaded Xperia firmware

    load the downloaded Xperia firmware Stock ROM
  9. Now, Select the loaded Firmware.
    Select the loaded Firmware.
  10. Now, Click on the Flash button to begin the flashing process.
    Flash button to begin the flashing process
  11. Now, Power off your Xperia Device.
  12. Now, Press and Hold Volume Down button and connect the device to the computer using the USB cable.
  13. Once the device is successfully connected to the computer then you will be able to see the added message in Xperia Flashtool.
  14. Now, flashing will begin and will take 5-10 minutes to complete.
  15. Once the flashing process is completed, disconnect your device from the computer and Turn it On.

Important Notes:Xperia USB Driver: If you wish to download the original USB Driver for your Sony Xperia device, then head over to Xperia USB Driver page.

Flashing the Stock Firmware will delete your personal data from the device. If in case you are going to Flash the above firmware then take a backup of your personal data, so that you can recover your personal data if anything wrong happens.